不同的攪拌機可能有不同的配置,相同的點是隨著使用時間的增長,就會變得負荷大,工作時間增加可能會出現一些故障,需要檢查和保持這一點。那么混凝土攪拌機檢修的方法有哪些?
Different mixers may have different configurations. The same point is that with the increase of service time, the load will become heavy. With the increase of working time, some failures may occur, which needs to be checked and maintained. What are the maintenance methods of concrete mixer?
混凝土攪拌機之所以能快速運轉,是因為使用了大量的軸承。為了使軸承快速轉動,應定期添加潤滑油。此外,適當?shù)臐櫥筒粌H可以正常運行,而且可以避免長時間的摩擦對零件造成不同程度的磨損,影響混凝土攪拌機設備的正常運行。
The reason why the concrete mixer can run quickly is that a large number of bearings are used. In order to make the bearing rotate rapidly, add lubricating oil regularly. In addition, proper lubricating oil can not only operate normally, but also avoid abrasion of parts to varying degrees caused by long-term friction, which affects the normal operation of concrete mixer equipment.
混凝土攪拌機雖然自動化生產能力高,在整個生產過程中不需要太多的人工輔助,但操作人員要時刻關注設備的生產狀態,比如電機是否正常轉動,是否過熱,有沒有異響。
Although the automatic production capacity of the concrete mixer is high, it does not need too much manual assistance in the entire production process, but the operator should always pay attention to the production status of the equipment, such as whether the motor rotates normally, whether it is overheated, and whether there is abnormal noise.
混凝土攪拌機因工作原因容易受到粉塵污染,但當污染達到一定程度時,會影響混凝土攪拌機設備的正常運行,因此用戶應定期清洗。
The concrete mixer is vulnerable to dust pollution due to work, but when the pollution reaches a certain level, it will affect the normal operation of the concrete mixer, so the user should clean it regularly.
混凝土攪拌機每次使用時先要進行一次空轉,觀察設備是否能正常運轉。設備運行過程中,檢查電機、減速機、螺桿、轉軸發出的聲音是否異常,設備溫度是否過高;需要檢測混凝土攪拌機線、電路、控制箱各部件的潤滑油添加量,按要求添加潤滑油;
Each time the concrete mixer is used, it shall be idling once to observe whether the equipment can operate normally. During the operation of the equipment, check whether the sound from the motor, reducer, screw and shaft is abnormal, and whether the equipment temperature is too high; It is necessary to detect the amount of lubricating oil added to each component of the concrete mixer line, circuit and control box, and add lubricating oil as required;
Keep the concrete mixer clean in time, and keep abreast of pollutants and obstacles on the body. More relevant device content will come to our website http://www.weiboming.cn Consult and understand!